66 lines
3.2 KiB
Markdown
66 lines
3.2 KiB
Markdown
+++
|
|
title = 'DD-WRT as a Wireless Client Bridge'
|
|
date = 2024-09-16T18:55:11+03:00
|
|
draft = false
|
|
+++
|
|
If you live in a house where extending a simple networking cable would require a lot of work, you might find yourself buying something like a network printer and not being able to connect it to the network due to it not supporting wifi. These situations suck, but thankfully, there's a solution, the Wireless Client Bridge.
|
|
|
|
## Okay, what the hell is that?
|
|
A Wireless Client Bridge is a device that helps your computer/laptop/smart fridge connect to the internet when a direct wired connection to your main router wouldn't be possible.
|
|
|
|
### Pros:
|
|
* No need to spend ages googling your wifi drivers
|
|
* Better connections, as most commercial routers have better antennas than most commercial computers.
|
|
|
|
### Cons:
|
|
* It's another appliance that you need to maintain and power.
|
|
|
|
Here's a handy diagram of what we'll be doing today:
|
|
|
|
|
|
## 1. Setting up DD-WRT
|
|
It should be obvious that you must install DD-WRT on a compatible router. I decided for this setup to go with the old but reliable TP-LINK TL-WR1043ND. But you may be asking yourself, why use DD-WRT? Well, DD-WRT is simpler than alternatives like OpenWRT. That's it.
|
|
|
|
## 2. Initial setup
|
|
After flashing DD-WRT, you should go to the setup tab, and fill in the following:
|
|
* **Connection Type**: Disabled
|
|
* **Router Name**: Can be changed to anything
|
|
* **Local IP Address**: You need to select an IP address that is not already in use on your network. For example, I chose 192.168.1.2. If your network uses a different address range, such as 192.168.0.x or 10.10.1.x, you'll need to pick an IP from that range, like 192.168.0.2 or 10.10.1.2.
|
|
* **Gateway**: You must input the IP of your main router
|
|
* **Assign WAN Port to Switch**: Enable
|
|
* **DHCP Server**: Disable
|
|
|
|
Your settings should look something like this
|
|
|
|
|
|
## 3. Disabling the firewall
|
|
This can be done via Security > Firewall
|
|
* **SPI Firewall**: Disable
|
|
|
|
Now you may be thinking why you'd disable the firewall. Well, that is handled by your main router.
|
|
|
|
|
|
|
|
## 4. Connecting to the wireless network:
|
|
Go to Wireless > Basic Settings and fill in the following:
|
|
* **Wireless Mode**: Client Bridge (Routed)
|
|
* **Default GW Mode**: Manual
|
|
* **Gateway**: The IP of your main router. Mine's 192.168.1.1
|
|
* **Wireless Network Mode**: Mixed
|
|
* **Wireless Network Name (SSID)**: Your SSID. I redacted mine.
|
|
|
|
|
|
|
|
Now go to the Wireless Security tab and chose the following (these are the most common settings found on most routers):
|
|
* **Security Mode**: WPA
|
|
* **Network Authentication**: WPA2 Personal
|
|
* **WPA Shared Key**: your password
|
|
|
|
|
|
|
|
Now you can check if you configured the wireless stuff correctly by going to the Status > Wireless tab and reviewing the stuff there.
|
|
|
|
## 5. Profit
|
|
Now you can finally apply all the changes. You'll have to change to 192.168.1.2 or whatever IP you chose in step 1 for the router.
|
|
|
|
I am still a DD-WRT novice, so if I missed anything, or something doesn't work properly, please let me know. |